Wilson Electronics 811201 Installation Guide download pdf (Page 6)

Contact Wilson Electronics Tech Support with any questions at (507)282-8484

Or email: [email protected] Hours: 7am to 6pm MST.

NOTE: Depending on your

specic cell phone, the adapter

socket may be located beneath a

rubber plug.

Figure 1

In-Vehicle/In-Building

Installing a Wilson External Adapter

An external adapter is required to connect the cell phone or cellular data card to the Signal

Booster. The external adapter is cell phone/data card-specic and may be purchased

through a local retailer.

Refer to Wilson’s Adapter Guide to identify

the right adapter for your cell phone or

cellular data card. The adapter guide is

available through a local retailer or visit

www.WilsonElectronics.com.

The external adapter plugs into the included six-foot extension cable and directly into a

socket on the cell phone or cellular data card as shown in Figure 1. (NOTE: See the user’s

manual for your specic phone or data card to determine the socket location.)

Run the extension cable from the external adapter on the cell phone or cellular data card

and attach it to the connector labeled “Inside Antenna” on the Signal Booster.

Sample

external

adapter

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Wilson Electronics 811201 Installation Guide Page 6